Celebrate Card Designed by Shauna Berglund-Immel
Presented by Sara Naumann
Materials
Needed
Patterned Paper Pizazz® 8”x8”
Vacation Papers
Cardmaker’s™ Citrus Ribbons
Cardmaker’s™ Mary Anne’s
Card Quotes
Cardmaker’s™ 5”x6
1/2” blank white
X-acto® knife, cutting mat
Glue Dots™
pencil and ruler
Instructions
1.
1. With the fold at the left, line up the bottom Lattice
Folds pattern with the folded edge of the card by turning the template
so the header is to the left. Trace the pattern with a pencil, then
remove the template. Place the card on a cutting mat and use a ruler
to make cuts on the pencil lines through both layers of the card.
Open the card so the front is on top and fold the cut chevrons down.
2.
2. Cut a 4”x6 1/2” piece of green plaid
paper and mat the right and left sides on brown textured paper,
trimming closely. Glue to the card front, 3/8” from the right
edge. Cut the “Celebrate” card quote to 4” x1
1/4” and mat on brown textured, trimming all sides closely.
Center on the card front. Knot the center of a piece of lime grosgrain
ribbon. Trim the tails to 1 1/2” and use a Glue Dot™
to add centered, under the quote.
3.
3. For the card inside: Cut a 2 3/4”x6 1/2”
piece of green plaid and center on the inside back of the card.
Cut the quote to 4 3/8”x1 1/2” and mat on brown textured,
trimming closely. Add center on the plaid paper, flush with the
right edge of the card.
