Play Ball
Scrapbook Page
Designed by Barbara Greve
|
| Materials
Needed |
|
 |
2-12” x 12”
blue papers, one each red and white and papers |
|
1-8 ½” x 11 yellow paper
|
|
Fiskars® Circles Template |
|
Fiskars® 1/8” circle hand
punch |
|
Blue chalk |
|
Red, blue, black and yellow markers
|
|
Glue |
|
Scissors |
|
Pencil |
|
Tracing paper |
|
Cotton swabs |
|
Ruler |
|
26” red and yellow jewelry hemp |
| |
|
| |
| Instructions
|
| 1. |
1. Measure and cut a 12” x 5” strip and
3 ½” square of white paper, a 4" x 12” strip
of red paper and a 3 12/” square of blue paper. Using the
circles shape template trace a 4” and 3” circle on white
paper, a 3 ½” circle on yellow paper and a 4”
circle on red paper with a pencil. Cut the circles out. |
| 2. |
2. Cut the patterns for the soccer balls onto tracing
paper, turn the paper over and go over the lines again with a pencil.
Turn the tracing paper right side up on the white circle that fits
and go over the lines again with a ball point pen. Color in the
sections of the balls market “B” with the bullet tip
of the black marker. Set aside to dry. |
| 3. |
3. Draw lines across the white strip of paper the
short way 1” apart with the bullet tip of the red marker.
Draw two lines between the red lines with the bullet tip of the
blue marker. Draw lines here and there with the bullet tip of the
yellow marker. The lines don’t have to be perfectly straight
or exactly 1” apart. Keep it loose and have fun. Using a cotton
swab chalk over the lines with blue here and there. |
| 4. |
4. Glue the white strip the long way on the right
wit the right edge flush against the blue paper. Glue the red strip
over the striped paper with the left side flush with the left side
of the striped paper. Glue the blue, white and yellow squares over
the red paper centered and 3/8” from the top and bottom and
3/8” between. Glue the balls as shown on the remaining blue
paper. Trim the bottom white and red ball to fit as shown. Transfer
the letters as described above and go over them with the bullet
tip of the black marker. Punch three sets of 1/8” holes 1
¼” apart, 5/8” from the red strip, ½”
from the top and ½” in between. Thread the red and
yellow jewelry hemp through the holes as shown, tie into a bow at
the bottom and trim ends. |
| |
|
|
|
|
