Cut a strip of 3.5" x 12" of patterned
paper. Lay it over the left side of the cardstock overlapping the
photo.
3.
Next you'll need the 1/8" eyelet setter to set
three sets of eight holes on this page. We'll just concentrate on
the top right corner. Place the page on a self-healing mat. You
need to create eight holes about a half-inch apart, four in each
row. Place the hole-setting side of the tool on the page and pull
the spring straight up. Release the spring, and then lift up your
eyelet tool. You should have a whole in the paper. Flip the page
over and place the eyelet shaft through the hole. Place the setting
end of the eyelet tool on top of the eyelet, pull up on the spring
and release the spring. Be sure to pull straight up and do not pull
it more than two inches. Repeat this a couple of times to make sure
the eyelet is set. Repeat this whole process on the other seven
holes.
4.
Weave the shoelace through the holes like you are
tying a shoe and tie a bow.
5.
Repeat this shoelace design on other parts of the
page.
