Unfold the trifold card with the punched design in the middle. Punch out the middle design and use for another project. Fold the right flap of the card back.
2.
Cut out the rub-on transfer designs from the sheet. Cut out the three starfish in one strip, a single sea horse, and two separate mini star fish.
3.
Peel off the backing to the sea horse and lay the sea horse onto the center of the card. At this point you will be placing the rub-ons onto the right flap of the card that you folded back in step one. Starting at the top of the sea horse design firmly rub on top of the transfer with the craft stick provided. Now go back and gently peel back the transfer sheet making sure your design remains on the card.
4.
Using your Fiskars paper trimmer cut the three starfish in half. Place the half of the star fish on the top portion of the card and transfer the design. Transfer the other half of the design next to the first. Please note, you will be transferring half of the design onto the right flap of the card that you folded back in step one. When you look at the closed card it will seem like the star fish are connected.
5.
Just above the sea horse transfer one mini star fish. Layer the second mini star fish on a portion of the first mini star fish.
6.
Flip the card over with the opening still in the middle section. Use adhesive tape to attach the bubble front to the opening of the card. Add seashells and attach the back flap to the card.
7.
Transfer some rub-on sentiments to the front of the card following step three.
8.
Add glimmer chalks around the edge of the card. I used my finger so I could best adjust the amount of chalk I used.
Idea to note: you can use the Royal & Langnickel transfers on all surfaces except PVC pipe.
Sponsor:
Royal® & Langnickel Brush Manufacturing Company
